Savings of Up To 40% Off Manufacturers List Price on ABI310 Internally Uncoated Low Fluorescent Background Capillaries
-- Uncoated Low Fluorescent Background ABI 310 Fused Silica Capillaries Used for DNA Fragment Analysis and Long Read Sequencing (guaranteed to last at least two hundred injections, sometimes get one thousand injections if treated properly)
BT's ABI 310 capillaries have excellent resolution for DNA fragment analysis, long read sequencing and lowest fluorescent background, reliable & batch-to-batch reproducible, can be regenerated after its performance deteriorates. The regeneration is done by using ABI 310 Capillary Regeneration Reagent, we also sell Regenerated ABI3730 Array.
What Is Capillary Regeneration?
As the number of injection performed on the capillary increases, the resolution and the signal intensity resulting from this capillary will decline. This is primarily due to the adsorption of proteins to the wall of the fused silica capillary. The regeneration procedure washes the capillaries with regeneration buffer. This cleaves the proteins into smaller fragments, reducing the number of attractive forces per protein molecule, and therefore reducing the force with which each molecule binds to the wall of the capillary. The proteins are then more easily washed away from the capillary walls. This doesn't apply to the capillaries that are irreversibly blocked, these capillaries will not be restored by the regeneration procedures. BUT IT DID APPLY TO YOUR OLD ARRAYS IN YOUR DRAWERS WITH BOTH DRIED ENDS!! BIOTAQ's Regeneration Reagent can regenerate capillary from capillary machine model # 310, 3100, 3130, 3700, 3730. What is more you can use this regeneration reagent to re-regenerate your capillary for one more time, it really saves lots of money for capillary.
How to Do It On the Machine?
just running any Fill Capillary Module or any Module that allows you to pump capillary thru two droplets of this regeneration reagent, that is not to much for most of our customers, what is more critical is that you have to make sure the regeneration reagent is actually going thru the capillary, so we need you to visually check there are some droplets of this reagent coming off the capillary. Afterwards, empty the reagent out, and it is THAT simple. When you have 3730 machine, we have a total different protocol for you to do that. Please contact us first for more details.How to Regenerate Your ABI Capillary Off the Machine?
You could either use our Simplified Syringe Device (SP-01) or if you have any vacuum device, you could just first empty the capillary, make sure seal both ends with DD water and when you start regenerating, just put one end of the capillary in the regeneration reagent, apply another end with some pressure, just rinse the capillary with two droplets of this reagent, and air dry the capillary, that is it!
If You Really Really Don't Want to Do It......just send it to us, we have this service, it is really really cheap...you can check it out here...
Cat. #
length
capillary
qty.
price
Regenerative ABI 310 Capillary (Cat #: BTABI31047-01)
47cm
fused silica
1
$25
Regenerative ABI 310 Capillary (Cat #: BTABI31061-01)
61cm
fused silica
1
$35
ABI capillary Regeneration Reagent (Cat #: ABI310-RA)
5ml
ask for price
Simplified Syringe Device) (Cat #: SP-1)
1
$100
plus $35.0 (for US) and $65.0 (for international) shipping and handling.
Here is the Order Form: http://www.biotaq.com/customersupport/BIOTAQ INC ORDER FORM.pdf
Testimonial
With Regeneration Reagent, get over 1000 injections --- " the 310 regeneration has worked very well for us. I usually get over 1000 runs per capillary " (Dr. Jobin, Forensic DNA Specialist from Alberta Sustainable Resource Development, Fish and Wildlife Forensic Laboratory).
Related Products:
Bare fused silica capillary tubing